Determination of relevant Indicators for Environmental monitoring: A Strategy for Europe (DIESE) Final Scientific Report

The DIESE program (Determination of relevant Indicators for Environmental monitoring: A Strategy for Europe) brought together seven French and British research teams, a private company and the agencies responsible for the management of water bodies of the two countries (ONEMA and the Environmental Agency) in a joint effort to document the ecotoxicological effects related to the presence of chemicals in the environment. To contribute to a better understanding and management of the environment, the program has expanded its efforts to (1) use existing knowledge, or new information acquired during the research program, to identify important biological problems affecting the wildlife, (2) increase our understanding of toxicological mechanisms involved and thus be able to identify the causes of the identified dysfunctions and (3) to hone our expertise and vigilance system in order to better monitor changes in the environment and make appropriate diagnoses.

Measurement Of The Responses Of Individuals To Environmental-Stress And Pollution - Studies With Bivalve Mollusks

Certain physiological differences between individuals in different populations of the mussel, Mytilus edulis, are described. In particular, the scope for growth differs in space and time and may be used to assess the animals' physiological condition. When the required measurements are made in the field, the rates of growth predicted from the physiological data agree well with observed rates of growth. An alternative approach utilizes mussels transplanted to various waters, with indices of condition then measured in the laboratory under standard conditions; an example of this approach is illustrated. Laboratory experiments are used to equate various levels of physiological condition with fecundity, in an attempt to equate physiological effects on the individual with likely population damage. A cytochemical index of stress is described, based on the latency of lysosomal enzymes; spatial variability in this index, and its relation with the scope for growth, are discussed. Finally, the results of some experiments on the effects of petroleum hydrocarbons on mussels are described and the presence of inducible activity of NADPH-dependent tetrazolium reductase in the blood cells is demonstrated. Certain considerations that apply in adopting similar measurements of biological effects of pollution in environmental monitoring programmes are discussed.

Marine baseline and monitoring strategies for carbon dioxide capture and storage (CCS)

The QICS controlled release experiment demonstrates that leaks of carbon dioxide (CO2) gas can be detected by monitoring acoustic, geochemical and biological parameters within a given marine system. However the natural complexity and variability of marine system responses to (artificial) leakage strongly suggests that there are no absolute indicators of leakage or impact that can unequivocally and universally be used for all potential future storage sites. We suggest a multivariate, hierarchical approach to monitoring, escalating from anomaly detection to attribution, quantification and then impact assessment, as required. Given the spatial heterogeneity of many marine ecosystems it is essential that environmental monitoring programmes are supported by a temporally (tidal, seasonal and annual) and spatially resolved baseline of data from which changes can be accurately identified. In this paper we outline and discuss the options for monitoring methodologies and identify the components of an appropriate baseline survey.

Challenges and difficulties in assessing the Environmental Status under the requirements of the Ecosystem Approach in North-African countries, illustrated by eutrophication assessment

Marine ecosystems provide many ecosystem goods and services. However, these ecosystems and the benefits they create for humans are subject to competing uses and increasing pressures. As a consequence of the increasing threats to the marine environment, several regulations require applying an ecosystem-based approach for managing the marine environment. Within the Mediterranean Sea, in 2008, the Contracting Parties of the Mediterranean Action Plan decided to progressively apply the Ecosystem Approach (EcAp) with the objective of achieving Good Environmental Status (GES) for 2018. To assess the Environmental Status, the EcAp proposes 11 Ecological Objectives, each of which requires a set of relevant indicators to be integrated. Progress towards the EcAp entails a gradual and important challenge for North-African countries, and efforts have to be initiated to propose and discuss methods. Accordingly, to enhance the capacity of North-African countries to implement EcAp and particularly to propose and discuss indicators and methods to assess GES, the aim of this manuscript is to identify the practical problems and gaps found at each stage of the Environmental Status assessment process. For this purpose, a stepwise method has been proposed to assess the Environmental Status using Ecologic Objective 5-Eutrophication as example.

Challenges and difficulties in assessing the Environmental Status under the requirements of the Ecosystem Approach in North-African countries, illustrated by eutrophication assessment

Marine ecosystems provide many ecosystem goods and services. However, these ecosystems and the benefits they create for humans are subject to competing uses and increasing pressures. As a consequence of the increasing threats to the marine environment, several regulations require applying an ecosystem-based approach for managing the marine environment. Within the Mediterranean Sea, in 2008, the Contracting Parties of the Mediterranean Action Plan decided to progressively apply the Ecosystem Approach (EcAp) with the objective of achieving Good Environmental Status (GES) for 2018. To assess the Environmental Status, the EcAp proposes 11 Ecological Objectives, each of which requires a set of relevant indicators to be integrated. Progress towards the EcAp entails a gradual and important challenge for North-African countries, and efforts have to be initiated to propose and discuss methods. Accordingly, to enhance the capacity of North-African countries to implement EcAp and particularly to propose and discuss indicators and methods to assess GES, the aim of this manuscript is to identify the practical problems and gaps found at each stage of the Environmental Status assessment process. For this purpose, a stepwise method has been proposed to assess the Environmental Status using Ecologic Objective 5-Eutrophication as example.

Data processing of remotely sensed airborne hyperspectral data using the Airborne Processing Library (APL): Geocorrection algorithm descriptions and spatial accuracy assessment

Remote sensing airborne hyperspectral data are routinely used for applications including algorithm development for satellite sensors, environmental monitoring and atmospheric studies. Single flight lines of airborne hyperspectral data are often in the region of tens of gigabytes in size. This means that a single aircraft can collect terabytes of remotely sensed hyperspectral data during a single year. Before these data can be used for scientific analyses, they need to be radiometrically calibrated, synchronised with the aircraft's position and attitude and then geocorrected. To enable efficient processing of these large datasets the UK Airborne Research and Survey Facility has recently developed a software suite, the Airborne Processing Library (APL), for processing airborne hyperspectral data acquired from the Specim AISA Eagle and Hawk instruments. The APL toolbox allows users to radiometrically calibrate, geocorrect, reproject and resample airborne data. Each stage of the toolbox outputs data in the common Band Interleaved Lines (BILs) format, which allows its integration with other standard remote sensing software packages. APL was developed to be user-friendly and suitable for use on a workstation PC as well as for the automated processing of the facility; to this end APL can be used under both Windows and Linux environments on a single desktop machine or through a Grid engine. A graphical user interface also exists. In this paper we describe the Airborne Processing Library software, its algorithms and approach. We present example results from using APL with an AISA Eagle sensor and we assess its spatial accuracy using data from multiple flight lines collected during a campaign in 2008 together with in situ surveyed ground control points.

Replacing rubber plantations by rain forest in Southwest China - Who would gain and how much?

The cultivation of rubber trees in Xishuangbanna Prefecture in China’s Yunnan Province has triggered an unprecedented economic development but it is also associated with severe environmental problems. Rubber plantations are encroaching the indigenous rainforests at a large scale and a high speed in Xishuangbanna. Many rare plant and animal species are endangered by this development, the natural water management is disturbed and even the microclimate in this region has changed over the past years. The present study aims at an assessment of the environmental benefits accruing from a reforestation project partly reversing the deforestation that has taken place over the past years. To this end a Contingent Valuation survey has been conducted in Xishuangbanna to elicit local residents’ willingness to pay for this reforestation program that converts existing rubber plantations back into forest. It is shown that local people's awareness of the environmental problems caused by increasing rubber plantation is quite high and that in spite of the economic advantages of rubber plantation there is a positive willingness among the local population to contribute financially to a reduction of existing rubber plantations for the sake of a partial restoration of the local rainforest. These results could be used for the practical implementation of a PES (Payments for Eco-System Services) system for reforestation in Xishuangbanna.

DIESE Final Report

The DIESE program (Determination of relevant Indicators for Environmental monitoring: A Strategy for Europe) brought together seven French and British research teams, a private company and the agencies responsible for the management of water bodies of the two countries (ONEMA and the Environmental Agency) in a joint effort to document the ecotoxicological effects related to the presence of chemicals in the environment. To contribute to a better understanding and management of the environment, the program has expanded its efforts to (1) use existing knowledge, or new information acquired during the research program, to identify important biological problems affecting wildlife, (2) increase our understanding of toxicological mechanisms involved and thus be able to identify the causes of the identified dysfunctions and (3) to hone our expertise and vigilance systems in order to better monitor changes in the environment and make appropriate diagnoses. The first part of the program identified clear biological effects, and using biological tests representative of the mechanisms of action of compounds, identified the responsible compounds present in the environment. In connection with the feminization observed in many fish species in European streams, a search for estrogenic and anti-androgenic compounds was conducted. A new test identifying estrogenic compounds has been developed in roach and the ER-Calux test for anti-androgenic effects has been implemented. The results showed that, in addition to biocides such as triclosan and chlorophène, many aromatic hydrocarbon compounds are likely to disturb the physiology of living organisms by interacting with the androgen receptor. Six of these were identified in sediment extracts: benzanthrone, fluoranthene, 1,2- benzodiphenylene sulfide, benzo[a]pyrene, benz[a] anthracene, and 9-phenylcarbazole. The second part of the program aimed at documenting and understanding the mechanisms of action of chemicals leading to physiological changes. This work represents a particular challenge when dealing with molluscs, as knowledge about their physiology and endocrinology is still fragmentary. Thus, new technologies including metabolomic and transcriptomic analyses have been implemented in order to obtain a comprehensive picture of the effects on molluscs. Metabolomic research demonstrated that estrogenic compounds are able to alter the metabolism of eicosanoids and amines, while transcriptomic strategies identified genes whose expression is altered in intersex clams. Because these genes mainly appear as “male” genes, the results suggest that these profound physiological changes result from demasculinisation of male clams. Proteomic studies have also been carried out to elucidate the mechanisms of action of pollutants on fish physiology. These studies generally included a set of molecular marker measurements in an integrative and ecological perspective. The results showed that not only male fish physiology is altered but also female reproductive status is impaired. Moreover, it appeared that other alterations of the fish endocrine system, such as androgenic effects, are at work and that the immune system is also subject to chemical pressure including effects from environmental estrogens. Notably, the immune system, like the endocrine system, seems to show periods of particular sensitivity during development. Measurements on growth and on the general metabolism emphasize the importance of environmental conditions in the physiology of aquatic organisms and in particular the inter-site variability due to temperature,hypoxic conditions, and fish development strategies. They thus provide a unique perspective that allow us to better understand the context and consequences of natural conditions on the population. In a third part of the program, the research conducted had the objective of developing and testing a biomarker strategy to support the environmental management methodologies. Two lanes of specific studies have been followed. The first was to implement, over all or part of the study area, robust biomarkers to establish maps that highlight the water bodies at risk and provide information on sources of compounds and associated disturbances. The second part of the work aimed at exploring methodologies to take advantage of biomarker measurements and to integrate them in a very simple and clear index. Partial or comprehensive maps of the Channel area were produced to report the presence of mutagenic or anti-androgenic compounds in the sediments, intersex fish and clams, and imposex. These maps may remain to be completed and work will be necessary to confront this information in order to learn relevant lessons for management of the environment, a goal that the DIESE program has contributed to by providing some necessary and original information.

Conceptual Ecological Modelling of Sublittoral Rock Habitats to Inform Indicator Selection

The purpose of this study is to produce a series of Conceptual Ecological Models (CEMs) that represent sublittoral rock habitats in the UK. CEMs are diagrammatic representations of the influences and processes that occur within an ecosystem. They can be used to identify critical aspects of an ecosystem that may be studied further, or serve as the basis for the selection of indicators for environmental monitoring purposes. The models produced by this project are control diagrams, representing the unimpacted state of the environment free from anthropogenic pressures. It is intended that the models produced by this project will be used to guide indicator selection for the monitoring of this habitat in UK waters. CEMs may eventually be produced for a range of habitat types defined under the UK Marine Biodiversity Monitoring R&D Programme (UKMBMP), which, along with stressor models, are designed to show the interactions within impacted habitats, would form the basis of a robust method for indicator selection. This project builds on the work to develop CEMs for shallow sublittoral coarse sediment habitats (Alexander et al 2014). The project scope included those habitats defined as ‘sublittoral rock’. This definition includes those habitats that fall into the EUNIS Level 3 classifications A3.1 Atlantic and Mediterranean high energy infralittoral rock, A3.2 Atlantic and Mediterranean moderate energy infralittoral rock, A3.3 Atlantic and Mediterranean low energy infralittoral rock, A4.1 Atlantic and Mediterranean high energy circalittoral rock, A4.2 Atlantic and Mediterranean moderate energy circalittoral rock, and A4.3 Atlantic and Mediterranean low energy circalittoral rock as well as the constituent Level 4 and 5 biotopes that are relevant to UK waters. A species list of characterising fauna to be included within the scope of the models was identified using an iterative process to refine the full list of species found within the relevant Level 5 biotopes. A literature review was conducted using a pragmatic and iterative approach to gather evidence regarding species traits and information that would be used to inform the models and characterise the interactions that occur within the sublittoral rock habitat. All information gathered during the literature review was entered into a data logging pro-forma spreadsheet that accompanies this report. Wherever possible, attempts were made to collect information from UK-specific peer-reviewed studies, although other sources were used where necessary. All data gathered was subject to a detailed confidence assessment. Expert judgement by the project team was utilised to provide information for aspects of the models for which references could not be sourced within the project timeframe. A multivariate analysis approach was adopted to assess ecologically similar groups (based on ecological and life history traits) of fauna from the identified species to form the basis of the models. A model hierarchy was developed based on these ecological groups. One general control model was produced that indicated the high-level drivers, inputs, biological assemblages, ecosystem processes and outputs that occur in sublittoral rock habitats. In addition to this, seven detailed sub-models were produced, which each focussed on a particular ecological group of fauna within the habitat: ‘macroalgae’, ‘temporarily or permanently attached active filter feeders’, ‘temporarily or permanently attached passive filter feeders’, ‘bivalves, brachiopods and other encrusting filter feeders’, ‘tube building fauna’, ‘scavengers and predatory fauna’, and ‘non-predatory mobile fauna’. Each sub-model is accompanied by an associated confidence model that presents confidence in the links between each model component. The models are split into seven levels and take spatial and temporal scale into account through their design, as well as magnitude and direction of influence. The seven levels include regional to global drivers, water column processes, local inputs/processes at the seabed, habitat and biological assemblage, output processes, local ecosystem functions, and regional to global ecosystem functions. The models indicate that whilst the high level drivers that affect each ecological group are largely similar, the output processes performed by the biota and the resulting ecosystem functions vary both in number and importance between groups. Confidence within the models as a whole is generally high, reflecting the level of information gathered during the literature review. Physical drivers which influence the ecosystem were found to be of high importance for the sublittoral rock habitat, with factors such as wave exposure, water depth and water currents noted to be crucial in defining the biological assemblages. Other important factors such as recruitment/propagule supply, and those which affect primary production, such as suspended sediments, light attenuation and water chemistry and temperature, were also noted to be key and act to influence the food sources consumed by the biological assemblages of the habitat, and the biological assemblages themselves. Output processes performed by the biological assemblages are variable between ecological groups depending on the specific flora and fauna present and the role they perform within the ecosystem. Of particular importance are the outputs performed by the macroalgae group, which are diverse in nature and exert influence over other ecological groups in the habitat. Important output processes from the habitat as a whole include primary and secondary production, bioengineering, biodeposition (in mixed sediment habitats) and the supply of propagules; these in turn influence ecosystem functions at the local scale such as nutrient and biogeochemical cycling, supply of food resources, sediment stability (in mixed sediment habitats), habitat provision and population and algae control. The export of biodiversity and organic matter, biodiversity enhancement and biotope stability are the resulting ecosystem functions that occur at the regional to global scale. Features within the models that are most useful for monitoring habitat status and change due to natural variation have been identified, as have those that may be useful for monitoring to identify anthropogenic causes of change within the ecosystem. Biological, physical and chemical features of the ecosystem have been identified as potential indicators to monitor natural variation, whereas biological factors and those physical /chemical factors most likely to affect primary production have predominantly been identified as most likely to indicate change due to anthropogenic pressures.